What this topic covers
Planning and Estimating on the General Building (B) Examination: the scope of the Class B license, plans and specifications, permits and inspections, scheduling, takeoff and pricing. These are original practice notes, not materials of the CSLB or PSI. License rules are based on California law in force on January 1, 2027; code values come from the 2025 California Building Standards Code (Title 24) and must be checked in the edition in force; plan reading, estimating and scheduling use standard methods of the trade.
Scope of the Class B license
- Two unrelated trades: a general building contract involves a structure requiring at least two unrelated building trades or crafts (Business and Professions Code section 7057).
- Framing and carpentry: a B contractor may take a prime contract or a subcontract for a framing or carpentry project, but framing or carpentry does not count as one of the two unrelated trades (section 7057).
- Single-trade work: for one trade such as plumbing, roofing or electrical, a B contractor without that classification may take the prime contract only by subcontracting the work to an appropriately licensed contractor, and may not take the subcontract.
- Incidental and supplemental: work in another classification that is essential to accomplish the work of the classification held; price share or location is not the test (16 CCR section 831).
- Business name: it may not suggest classifications the license does not hold (Business and Professions Code section 7059.1).
Plans, specifications and documents
- Views: a building section is a vertical cut showing framing, floor and roof assemblies and heights; a floor plan is a horizontal cut seen from above; an elevation shows an outside face.
- Dimensions: written dimensions normally govern over scaled ones, since reduced copies distort scale; conflicting written dimensions go to the design team in an RFI.
- CSI MasterFormat: Division 00 bidding and contracting forms; Division 01 General Requirements (submittals, quality control, closeout); Division 02 existing conditions; Division 10 specialties.
- RFI: asks the design team to clarify missing, unclear or conflicting information, such as a duct that conflicts with a beam, before installation.
- Submittal: product data, samples and shop drawings so the design team can confirm compliance with the specifications; ordering normally waits for approval.
- Change order: added scope is priced from unit costs plus the agreed markup and documented in writing before the work is done.
Permits, inspections and schedule
- Permit: the owner or authorized agent obtains the required permit from the building official before starting the work (California Residential Code Section R105.1; check the current code).
- Cover-up: work is inspected before it is covered; once drywall hides the pipes, the inspector cannot verify them.
- Float: time an activity can slip without delaying the project; a 3-day slip with 5 days of float leaves 2 days and the finish date does not move.
Takeoff and quantities
- Sequence: review plans and specifications, take off quantities, price, then add overhead and profit.
- Concrete: cubic yards = length x width x thickness in feet / 27. A 20 ft x 30 ft slab 4 inches thick is 200 cubic feet, or 7.41 cubic yards.
- Cylinder: 3.14 x radius squared x height; a 30-inch diameter is a 1.25-ft radius.
- Waste factor: raises the net quantity for cuts, breakage and spillage; round sheets, boxes and gallons up.
- Units: one roofing square = 100 square feet.
Pricing
- Labor burden: payroll taxes, workers' compensation premiums and employer-paid benefits added to wages.
- Overhead then profit: $240,000 direct cost x 1.10 = $264,000, then x 1.08 = $285,120.
- Unit price: pays the measured quantity: 1,340 cubic yards x $14.50 = $19,430, not the bid quantity.
Sample questions (5)
1. What is the MINIMUM number of unrelated building trades or crafts that a structure must require for work to fall within the general building contractor classification of Business and Professions Code section 7057?
- One unrelated building trade or craft
- Two unrelated building trades or crafts
- Three unrelated building trades or crafts
- Four unrelated building trades or crafts
Business and Professions Code section 7057 describes a structure “requiring in its construction the use of at least two unrelated building trades or crafts”. One trade is the field of a specialty contractor, and three or four trades is more than the statute requires.
2. Under 16 CCR section 830, which description matches a Class A license?
- General engineering contractor
- General building contractor
- Specialty trade contractor
- Qualifying individual (RMO)
16 CCR section 830 classifies contractors as specialty contractors, a “general engineering contractor (Class A)”, or a general building contractor (Class B). Specialty contractors carry the C classifications listed in 16 CCR section 832, and a qualifying individual is the person who qualifies a license, not a classification.
3. Under Business and Professions Code section 7057, a general building contractor that holds no other classification may take which single-trade project and do the work itself?
- A plumbing or tile project
- An electrical or HVAC project
- A framing or carpentry project
- A roofing or siding project
Section 7057 states that a general building contractor “may take a prime contract or a subcontract for a framing or carpentry project”. Plumbing, tile, electrical, HVAC, roofing and siding are each a single trade other than framing or carpentry, so a Class B contractor without that classification may take such a prime contract only by subcontracting the work to an appropriately licensed contractor, and may not take such a subcontract at all.
4. Harbor Light Builders holds only a Class B license. A homeowner asks it to take a prime contract for a job that consists solely of re-roofing a house. Under Business and Professions Code section 7057, what is the lawful approach?
- Self-perform the roofing after adding framing repairs to the contract
- Take the job once the homeowner signs a written waiver of the rule
- Treat the roofing as incidental work and do it with its own crew
- Hold the roofing classification or subcontract to a licensed roofer
Business and Professions Code section 7057 provides that a general building contractor “shall not take a prime contract for any project involving trades other than framing or carpentry” unless the contract requires at least two unrelated trades other than framing or carpentry, or the contractor holds the appropriate classification or subcontracts with an appropriately licensed contractor. A re-roof is a single trade, so the contractor needs the roofing classification or a licensed roofing subcontractor. Adding framing repairs does not help, because the contractor “shall not count framing or carpentry in calculating the two unrelated trades”; section 7057 provides no owner waiver; and the incidental and supplemental rule of 16 CCR section 831 applies to the work of a specialty contractor, not to a roofing-only prime contract taken by a Class B contractor.
5. A general building contractor may take a prime contract involving trades other than framing or carpentry for all of the following reasons EXCEPT:
- The contract requires two unrelated trades other than framing or carpentry
- The contractor subcontracts the work to an appropriately licensed contractor
- The contractor holds the appropriate license classification for the work
- The contract requires framing, carpentry and one other single trade of work
Section 7057 says the contractor “shall not count framing or carpentry in calculating the two unrelated trades” needed for a contract involving other trades. A contract of framing, carpentry and one other trade has only one qualifying trade, so it does not qualify on its own. The other three reasons are the ones the statute allows.